Controller MPC-374 are one of most complex devices on the market. It has 9 interfaces and each of them can be chosen, to do a specific combinations of tasks. Without all common interfaces, it can contain two Universal (switchable by jumpers) and power of 3,7;5;6;8 or 10 V for external devices, socket for micro SD card and etc.. Controller is widely used in supermarkets for accounting of power consumption, monitoring and controlling of refrigerators and as Backbone device for more complex projects.

Controller MPC-333 supports up to 6 interfaces, and each of them can be easely chosen, to do a specific combinations of tasks. Support common interfaces (RS232, RS485, Opto, CL, USB, Ethernet, GPRS/GSM), issue 3,7 / 5 / 6 / 8 or 10 V voltage and a lot of other functions. Is widely used in super markets for power accounting, for monitoring and control of heating, also as Backbone device for more complex projects.

Controller MPC-730 supports up to 5 interfaces, and each of them can be easely chosen, to do a specific combinations of tasks. Support common interfaces (RS232, RS485, Data/Req, CL, USB, Ethernet, GPRS/GSM, WCDMA/HSPA) issue 3,7 / 5 / 6 / 8 or 10 V voltage  and a lot of other functions. Is widely used in super markets for power accounting, for monitoring and control of heating, also as Backbone device for more complex projects.

Controller MPC-330 supports up to 5 interfaces, and each of them can be easely chosen, to do a specific combinations of tasks. Support common interfaces (RS232, RS485, Data/Req, CL, USB, Ethernet, GPRS/GSM) issue 3,7 / 5 / 6 / 8 or 10 V voltage  and a lot of other functions. Is widely used in super markets for power accounting, for monitoring and control of heating, also as Backbone device for more complex projects.

Controller MPC-143, with integrated GSM/GPRS modem for remote data transfer. Ready to use and charge an externa battery. Supports RS232, RS485, Opto, Mbus and GSM/GPRS interface. Controller is widelly used in heat carrier's accounting, facilities management and remote data transmisions.

Controller MPC-134 supports up to 4 interfaces, and each of them can be easely chosen, to do a specific combinations of tasks. Support common interfaces (RS232, RS485, Opto, MBus, GPRS/GSM) and a lot of other functions. Is widely used in super markets for power accounting, GAS stations for monitoring and control of GAS distribution.  

Created for GAS accounting Controller MPC-123 can read data from counters or other devices, Discrete IN, Analog IN chanals and using GSM/GPRS send data remotely, even on power fail situations. Support wide range of interfaces - RS485, RS232. Opto, MBus, Current loop, GSM/GPRS. Has Discrete IN  and Analog IN channals. Use 220V power and has internal batteries, that support autonomic data reading and sending for about 14 days (reading data 4 times per day). Controller has internal transformer and can be used to power 3,7/5/6/8/10 and 24 VDC connected devices. Equipped with IP65 class enclosure and external antenna. It is fully equipped device - you can take it and install, right on the wall. MPC-123 is for GAS accounting, control of devices and remote data exchange.

Protocol converter DK-2 designed for measuring, data reading and remote control over GSM/GPRS. Support main interfaces - RS232, Opto, GSM/GPRS. Also has Discrete and Analog Input channels. Are widely used in remote energy carrier meters data collecting and accommodation monitoring.

Main function of this small size Controller MPC-040 - converting between different interfaces. It support common interfaces - RS232, RS485, Opto, MBus and Current Loop. Prepared for mounting in communication racks (ready for DIN32 mounting).

Converter MBus-RS232/RS48 support up to 250 MBus devices, equipped with short connection protection, power for MBus line, automatic transmission direction for RS485. LED indicators allows you to track converters operations. DIN rail mounting and 220V power for quick and comfortable installing.

Compact size Controller MPC-210 designed for data exchange between RS232/RS485 and Ethernet interfaces. Over Ethernet data are sent using Modbus TCP/IP protocol. MPC-210 is prepared to be installed into electric distribution racks on DIN32 rail and can be powered from main power 50-250V~ or over ethernet using PoE (standard IEEE 802.3af).

Compact size Controller MPC-110 designed for read data from energy carrier meters (electricity, heat, water, GAS and other) with Mbus or RS485 or RS232 interfaces. MPC-110 is prepared to be installed into electric distribution racks on DIN32 rail and can be powered from main power 90-250V~.