Controller MPC-040 is created for data logging and analyzing in a real time. Using RS232, RS485, MBUS, Opto, Current loop controller read data and in set intervals send to remote users.
Device supports common interfaces (RS232, RS485, MBus, Opto, Current loop) and use Modbus RTU protocol for data transfer.
| First interface | ||
| RS485 | distance up to 1,2km, max 32 transivers, speed up to 19.2 Kbits/s | |
| RS232 | distance up to 15m, speed up to 19,2Kbit/s | |
| Second interface (galvanically isolated) | ||
| RS232 | distance up to 15m, speed up to 19,2Kbit/s | |
| Opto | (Kamstrup) data transfer interface | |
| MBus | up to 8 devices | |
| Third interface | ||
| RS232 | distance up to 15m, speed up to 19,2Kbit/s | |
| Fourth interface | ||
| 2 wire active Current Loop | 25-27V, 14-20mA, up to 6km, speed up to 19,2Kbit/s | |
| General | ||
| Power | 9-36 VDC | |
| Galvanic isolation | >1000V | |
| Capacity | 200mA max | |
| Regulatory approvals | ||
| Electromagnetic compatibility | EN 55022:2010 EN 55024:2010 EN 61000-4-2:2009 EN 61000-4-3:2006 EN 61000-4-3:2006/A1:2008 EN 61000-4-3:2006/A2:2010 EN 61000-4-4:2004 EN61000-4-4:2004/A1:2010 EN 61000-4-6:2009 | |
| Safety | EN 60950-1:2006+A1:2010+A11:2009+A12:2011 | |
| Specification | ||
| CPU | C8051F345 | |
| Memory | archive storage 1-8 MB, independant data storage without power about 5 years | |
| LED indication | ||
| Power | + | |
| Serial ports read/write for each port | + | |
| Programing and updating | ||
| Locally | RS232, RS485 | |
| Physical characteristics | ||
| Dimmensions | 120x101x35 mm | |
| Mounting type | on DIN32 rail | |
| Safety class | IP20 | |
| Climate conditions | ||
| Operating temperature | -25..+60 °C | |
| Humidity range | 5-95%, non-condensing | |
| Other fuetures | ||
| Real time clock | + | |
| 24 months warranty period | + | |